Water Level Controller Training Apparatus by Fuzzy & PID Theory

Specification / Price

Specification / Price

PCI Card or PC card: Is a card to be inserted into the empty slot of P/C so that the analog interface can be connected to P/C.
Analog Interface: Is a processor which converts the sensor data (water level) sent from the water level control amplifier into the Fuzzy inference inputs or PID control inputs of 1-5V as well as the Fuzzy inference results or PID control outputs into 4-20mA signals to supply as the outputs for pump control.; Dimension: 300W x 50H x 200D (mm); Source Power: AC 100 V
Water Level Control Amp.: Is a converter of the sensor data (capacitance type water level gauge) into the control inputs of 1-5V. Meanwhile, it receives 4-20mA signals sent from the controller and control the pump discharge by chopper method. The power for this amplifier is supplied in +5V and ±15V from the analog interface.
Water Level Control Kit
Sensor: Is a capacitance type water level gauge which use two stainless electrodes.
Pump: Is a water pump for the household bathtub application and its discharge is controlled by chopper method.
Dimensions: Water Reserve Tank: 220W x 130H x 160D (mm); Water Control Tank: 80F x 210H (mm); Overall Dimension: 260W x 470H x 170D (mm)
Weight: Approx. 3 kg (w/ water of 2/3 in the reserve tank)
Pump Power Supply Unit: Input: AC 100 V (20 VA); Output: DC 11 V (0.8 A); Weight: 0.6 kg

Set Contents Ask Price!

CPU: Pentium 166 MHz or higher; (Caution) Fuzzy control does not work normally with CPU of less than 166 MHz.
OS: Windows 95, 98, Me, NT(4.0), 2000, XP; Recommended OS: Windows NT(4.0), 2000, XP; (Caution) Fuzzy control works normally under Windows 9x. However, the selection range of the control cycle time is limited.
Memory: 32 MB or higher
FDD: 3.5" FDD
Monitor: 800 x 600 High Color (16bit) or higher
Mouse
PCI Bus or PC card slot: Empty Slot: 1 or more